・Effect of Ply Thickness on Mechanical Properties in Multidirectionally Laminated Composites.<br>・Development of a ｔhin prepreg sheet and a thin-ply laminateusing tow-spreading technology. | Database to support industry-university cooperation

・Effect of Ply Thickness on Mechanical Properties in Multidirectionally Laminated Composites.
・Development of a ｔhin prepreg sheet and a thin-ply laminateusing tow-spreading technology.

【Supercategory：2. Fiber manufacturing Category：2.2 Fiber manufacturing Subcategory：2.2.3 Texturing】

　A new fiber spreading technology (FUKUI method) to obtain the continuously wide and thin reinforcing fiber-tow was developed. Thin prepreg sheet less than 0.05mm in thickness can be prepared by using this method.
　The mechanical tests were conducted on the thin-ply laminates which were produced by stacking these prepreg sheets. As a result, the thin-ply effect, that is, the initial failure stress increases with decreasing layer thickness was found.

Questionnaire 2014/Shinshu University Faculty of Textile Science and Technology Fii

Researcher	Kouhei Yamada
University or institution	Industrial Technology Center of Fukui Prefecture

Keywords

FRP, CFRP, Thin-ply laminate, Tow-spreading technology

back to "Reseach Seeds" page

・Effect of Ply Thickness on Mechanical Properties in Multidirectionally Laminated Composites.・Development of a ｔhin prepreg sheet and a thin-ply laminateusing tow-spreading technology.

・Effect of Ply Thickness on Mechanical Properties in Multidirectionally Laminated Composites.
・Development of a ｔhin prepreg sheet and a thin-ply laminateusing tow-spreading technology.